Activate Bluetooth on Smartphone
On first start of s.QUAD Android App, it will ask you to enable Bluetooth. We
recommend you confirm this question. Otherwise, you may enable Bluetooth
following the steps outlined below:
Android
Please enter “Settings” (gear icon), then navigate to Bluetooth and turn it on. On
some Android devices you may find Bluetooth in “Connections” or “Networks”
Apple
Please enter “Settings” (gears icon), Bluetooth and change the switch to «on».
Disconnect Bluetooth
In case it is not possible to set up a connection, it may make sense to first “tear
down” a partial connection completely. After this, a fresh start can be made. To start
over, please follow the steps below:
1) Important, start with s.QUAD:
Please navigate into the Bluetooth menu (usually in “Settings”) and select “Remove
Bond”. Now s.QUAD may ask you to also delete pairing information on the
smartphone.
Android:
Please navigate to «Settings» (gear icon), Bluetooth. Now search for your s.QUAD
(«s-QUAD C2uxyz.abcde»). Touch the gear next to the device name and select
“forget”. Sometimes also “unpair”, “disconnect” “unbond” or similar terms may be
used.
Apple:
Please navigate to “settings” (gears icon), Bluetooth. search for your s.QUAD («s-
QUAD C2uxyz.abcde»). Touch the (i) next to the device name. Now please select
“ignore this device” and confirm.
Now you can re-establish the connection using s.QUAD App.
Software Versions
Please note that both s.QUAD app and firmware are constantly extended and
improved. Please activate the automatic update of the app (or update it regularly by
hand). Depending on the date of manufacture of your s.QUAD, it may be worthwhile
updating the firmware. The current s.QUAD Firmware as of spring 2018 is 2.38.
Activate Bluetooth
Smartphone
Disconnect
Reset-Connection
Updating Software
