swissonic EasyKey 25, Руководство пользователя

Страница: 12 / 24

5 Functions
Proceed as follows to adjust the touch sensitivity:
1.
Press [EDIT ] to activate the Edit mode.
2. Repeatedly press [VELOCITY CURVE ] until the desired value is shown in the dis‐
play. Value range: normal ‘nor’ , soft ‘SoF’ , hard ‘hAr’ , ‘F–1’ , ‘F–2’ , ‘F–3’ .
3.
Press [EDIT] to leave the Edit mode.
Use the slider to set the volume [VOLUME] . The slider can also be assigned to another
MIDI command.
With the arrow buttons [OCTAVE] you can transpose the pitch of the entire keyboard
up to three octaves up or down. The display shows the selected level ( ‘-03’ … ‘0’ …
‘03’ ) and the corresponding arrow key lights up red simultaneously when octave
shifting.
Simultaneously press [EDIT] along with one of the arrow buttons [OCTAVE] to trans‐
pose the entire keyboard in semitones up or down. The current value appears in the
display ( ‘-12’ … ‘0’ … ‘12’ ).
Use the Pitchbend wheel to vary the pitch up or down while playing. How many sem‐
itones can be pitch bended up or down depends on the tone generator used.
The function of the modulation wheel depends on the tone generator used. Usually,
this controls the intensity of a vibrato effect.
Proceed as follows to assign another MIDI CC to the modulation wheel.
1.
Press [EDIT] to activate the Edit mode.
2. Press [ASSIGN MOD] .
ð
The currently set value is shown in the display.
3.
Enter the desired value ( ‘1’ … ‘127’ ) via the numeric keys.
4.
Confirm the input with [ENTER] .
5. Press [EDIT] to leave the Edit mode.
Setting the touch sensitivity
Setting the volume
Octave transposing
Transposing
Pitch bending
Modulation
Functions
MIDI keyboard
12