2
1. How to charge
While it’s possible that your SW 610 HR will
already come with enough charge to be powered
on right out of the box, we recommend to fully
charge it before first use.
1.
Attach the supplied charing cable to the
bottom of the clock.
2.
Insert the USB charging connector into any
USB port that permits charging.
3.
Press the touch button to start the display if
not already lit.
Note!
Maximum charging output for USB charger: 5 V /
2 A. Always disconnect the charging cable from the USB
port before disconnecting it from the watch! To prevent
short circuits due to metals (eg paper clips, etc.) on the
charging cable, never leave it unused on an active USB
port!
Note!
Generally charging is quicker if plugged in to a USB
power supply compared to charging via other hosts such
as computers.
