Swisson XND-8, Руководство пользователя, Страница: 5 / 27

5
This product is approved for professional use only; it is not intended for household usage. Pay
attention to all warnings given in this manual and use this device only in accordance with
applicable laws and regulations.
Safety Precautions
•
Disconnect the device from the AC power supply before removing any cover or part,
including fuses, even when not in use.
•
Ensure that the device is electrically connected to ground (earth).
•
Use only a source of AC power supply that complies with local building and electrical
regulations and which has both overload and ground-fault (earth fault) protection.
•
Before using the device, check that the power distribution equipment and cables are in
perfect condition and rated for the current required by all connected devices.
•
Isolate the device from power supply immediately if the power cable or the power plugs
are in any way damaged, defective or wet, or if they show signs of overheating.
•
Do not expose the device to rain or moisture.
•
Do not operate the device if any cover or component is missing, damaged or deformed.
•
Refer any service operation not described in this manual to Swisson.
•
Provide unrestricted airflow around the device.
•
Do not operate the device if the ambient temperature exceeds 55°C (131°F).
•
Do not modify the device in any way not described in this manual or install other than
genuine Swisson parts.
•
Do not attempt to bypass any fuse. Replace any defective fuse with one of the specified
type and rating only.
•
When suspending the device, ensure that the supporting structure and all hardware used
can hold at least 10 times the weight of all devices suspended together.
•
When suspending the device, install a secondary attachment such as a safety cable that is
approved by an official body such as, e.g. TÜV (German Technical Monitoring Association),
a safety attachment for the total weight it secures. The safety cable must comply with EN
60598-2-17 section 17.6.6 and be capable of bearing a static suspended load 10 times the
weight of the device.
•
Make sure that any external cover and rigging hardware is securely fastened.
•
Provide an adequate clearance underneath the work area and a stable platform whenever
installing, servicing or moving an overhead device.
•
Do not use the device in areas where it is exposed to direct sunlight.
•
Do not use the device in areas that are “ highly inflammable ” .