6
UREA
Kilograms/Hectare
Km/h
LEVER
POSITION
LEVER
POSITION
LEVER
POSITION
1
2
3
4
5
4
182
555
931
1211
6
122
370
621
807
8
91
277
465
605
10
12
14
16
73
61
51
45
222 185 155 137
372 310 260 229
484 404 338 299
BARLEY
Km/h
1
2
3
4
5
4
113
383
658
865
6
75
25
439
577
8
56
191
452
594
10
12
14
16
45
38
32
28
153 128 107 94
263 219 184 162
346 288 242 213
WHEAT
Km/h
1
2
3
4
5
4
181
558
962
1241
6
121
372
641
828
8
90
279
480
620
10
12
14
16
72
60
51
45
223 186 156 138
384 321 269 237
496 414 347 306
NOTE:
Each model has its own spreading table,
which is affixed to the hopper.
4.
Place fertilizer or seed in the hopper.
5.
When starting the machine, the bottom of the blades should be 70cm from the ground for an even distribution, and the tractor RPM should be
at 540.
6.
Select the working speed and adjust the hatch openings as specified in the table according to the
amount of product you wish to spread per hectare. (The products whose spreading information is not presented in the tables rely on your
knowledge and experience.)
7.
When you begin spreading, always move the tractor at an even speed to ensure an even distribution.
8.
Remember that when you go faster, less product is spread per hectare, and vice versa.
9.
Engage the PTO at a low rpm and gradually increase the tractor engine rpm to 540.
START-UP (641001)
1. Fertilizer must pass through the sieve to ensure that the fertilizer will flow through the barrel and tubes.
2. Open the fertilizer output using the control wire.
3. Open the boom and adjust the "Y" outputs appropriately, adjusting the dispersal pattern according to the furrow type.
4. Accelerate the tractor engine to 540 RPM on the PTO.
5. Set the tractor speed, and the fertilizer spreader will begin depositing fertilizer at ground level.
Kilograms/Hectare
Kilograms/Hectare