Swisscom DECT/Rousseau, Руководство пользователя

Страница: 2 / 13

Quick start guide
1. Prepare the base station
• Switch Ecomode plus mode off
• Switch repeater mode on
• Set base to register mode
2. Take repeater in operation
• Position the repeater close to the base station
• Connect the main adapter
• The LED on the front of the repeater flashes slowly red (1.5 s/1.5 s)
• Wait until the white LED is ON
• The registration is completed
3. Place the repeater at desired location
• If the red LED is flashing quickly, please choose a place with higher signal strength
Repeater overview
1 LED (red or white)
2 Registration button
LED signals
LED does not light up: No power
LED white, permanently lit: Power on, normal operation,
registered and good signal strength
LED flashing red quickly: Searching or poor signal quality
LED flashing red slowly: Not registered / Ready for registration
LED flashing white: Active call or information exchange handset-base
1 2