Swisscom Classic A21 ISDN, Руководство пользователя

Страница: 11 / 60

9
20402856en_ba_a0
Setting up the telephone
Connecting the telephone
Plug the smaller of the two connectors on the
telephone connection cord into the socket on the
telephone base
➀
marked with the telephone
symbol.
Press the cable into the cable duct
➁
. To do this, use
a flat, thin object to press the cord under the grips.
Turn the telephone over again and set it on its feet.
Replace the handset.
Plug the larger connector at the other end of the
telephone connection cord into the wall socket
➂
.
Lift the handset. You will hear the dialling tone. You can now telephone!
➭
Do not plug the connection cord in sockets other than the one for which it is intended.
➭
Make sure the telephone connection cord is safely stowed to prevent accidents.
Installation assistant
An installation assistant simplifies things for you by guiding you step by step through the
setup procedure for your telephone.
Follow the displayed instructions and enter the preferred language, all MSN numbers
along with user name, as well as time and date.
Note • The installation assistant will re-appear following a reset of the telephone
(reset to default settings).
• You can also enter the preferred language, MSNs, time and date in the
corresponding menus.
2
1