Swisscom ATON CL401, Руководство пользователя

Страница: 44 / 74

43
Aton CL401 ISDN / SWZ-EN / A31008-M395-F151-1-2X19 / registr_sett.fm / 7.5.08
Ve
rs
ion 4,
16
.09.
2005
Cancel/deactivate room monitor
Press the end call key
a
to cancel the
call when the room monitor is activated .
In the idle status press the display key
§OFF§
to deactivate the room monitor
mode.
Changing the set destination number
v
¢
í
¢
Room Monitor
s
Scroll to the Call to: line.
X
or
§Delete§
Delete existing number.
¤
Enter and save number as described in
"Activating the room monitor and
entering the destination number"
(page 42).
Deactivating the room monitor
remotely
Preconditions : The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Accept the call from the room monitor
and press keys
9 ;
.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings (e.g. no ringer) on the handset
will remain activated until you press the
display key
§OFF§
on the handset.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with
§Save§
(page 42).
Handset settings
Your handset is preconfigured, but you
can change the settings to suit your indi-
vidual requirements.
Quick access to functions
and numbers
The default setting of the left display key is
preset with the Swisscom
§§§§Hotline§§§§
(Con-
tact Centre). The phone number 0800 800
800 cannot be changed. You can dial the
number by pressing the key.
You can assign a number or a function to
each of the digit keys
Q
and
2
to
O
. The right display key has a function
pre-assigned by default. You can change
the assignment.
The number is then dialled or the function
started by simply pressing a key.
Assigning a new digit key/left
display key
Following a handset
reset,
}
appears on the left display
key. The key can be reprogrammed. Repro-
gramming is identical to assigning a digit
key.
Precondition: The digit key has not yet
been assigned a number or function and
§§§§Hotline§§§§
is no longer assigned to the left
display key.
¤
Press the
}
display key or press
and hold the digit key.
The list of possible key assignments is
opened. The following can be selected:
Quick Dial
Assign a number from the directory to
the key.
The directory is opened.
¤
Select an entry and press
§OK§
.
If you delete or edit the entry in the
directory, this will not affect the assign-
ment to the number key or display key.