Swisscom Aton CL300, Руководство пользователя

Страница: 17 / 29

15
Handset settings
Gigaset S45 / SWZ PTT-en / Internet / start_guide_time.fm / 02.06.2006
§Save§
Press the display key.
a
Press and hold (idle status).
Activating/deactivating auto
answer
If you have activated this function, when
you get a call you can simply lift the hand-
set out of the charging cradle without hav-
ing to press the talk key
c
.
v
¢
Ð
¢
Handset
Auto Answer
Select and press
§OK§
( = on).
a
Press and hold (idle status).
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree talking to five different levels
and the earpiece volume to three different
levels. You can only make these adjust-
ments during a call.
The handsfree volume can only be
adjusted when this function is set.
You are conducting an external call.
t
Open menu.
r
Select volume.
§Save§
Press display key if necessary
to save the setting perma-
nently.
If
t
is assigned a different function:
§Options§
Open menu.
Volume
Select and press
§OK§
.
Configure setting (see above).
Changing ringtones
u
Volume:
You can choose between five volumes
(1–5; e.g. volume 2 =
ˆ
) and
the "Crescendo" ring (6; volume
increases with each ring =
‰
).
u Ringtones:
You can choose between 15 different
melodies.
You can configure the following functions
with different ringtones:
u
Ext. Calls : For external calls
u
Internal Calls
: For internal calls
u All : The same for all functions
Settings for individual functions
Set the volume and melody depending on
the type of signalling required.
v
¢
Ð
¢
Audio Settings
¢
Ringer Settings
q
Setting, e.g. select
Ext. Calls
and press
§OK§
.
¤
Change multiple line input:
r
Set volume (1–6).
s
Scroll to the next line.
r
Select melody.
§Save§
Press the display key to save
the setting.
In idle status, you can also open the menu
Ringer Settings
by pressing
t
briefly .
Settings for all functions to ring the
same
v
¢
Ð
¢
Audio Settings
¢
Ringer Settings
¢
All
¤
Set volume and ringtone (see "Settings
for individual functions").
§Yes§
Press the display key to con-
firm the prompt.
a
Press and hold (idle status).
Note:
When the display illumination is switched on,
the standby time of the handset is reduced to
approx. 30 hours.
‰