Swisscom Aton CL300, Руководство пользователя

Страница: 15 / 29

13
Using a handset as a room monitor
Gigaset S45 / SWZ PTT-en / Internet / start_guide_time.fm / 02.06.2006
Activating the room monitor and
entering the number to be called
v
¢
í
¢
Room Monitor
¤
Change multiple line input:
Room M.:
Select
On
to activate.
Call to:
Press the display key
§Edit§
and enter des-
tination number.
External number: select number from
the directory or enter directly. Only the
last 4 digits are displayed.
Internal number: delete any stored
external number.
§INT§
s
(select hand-
set or Call All , if all registered handsets
are to be called)
§OK§
.
Save numbers with
Save
.
Level:
Set noise level sensitivity ( Low or High ).
¤
Save changes (page 21).
The function is now activated. With
v
,
you can move directly to settings.
Changing previously set external
destination number
v
¢
í
¢
Room Monitor
s
Scroll to the Call to: line.
§Edit§
Press the display key.
X
Delete existing number.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 13).
¤
Save changes (page 21).
Changing previously set internal
destination number
v
¢
í
¢
Room Monitor
s
Scroll to the Call to: line.
§Edit§
Press the display key.
§Yes§
Press the display key to con-
firm the prompt.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 13).
¤
Save changes (page 21).
Deactivating the room monitor
remotely
Requirements : The phone must support
touch tone dialling and the room monitor
is set for an external destination number.
¤
Take the call from the room monitor
and press keys
9 ;
.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings on the handset (e.g. no ring-
tone) will however remain activated until
you press the display key
§Off§
on the hand-
set.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with
Save
(page 13).
Caution!
– You should always check the operation
of the room monitor before use. For
example, test its sensitivity. Check the
connection if you are diverting the room
monitor to an outside number.
– When the function is switched on the hand-
set's operating time is severely reduced. If
necessary, place the handset in the charg-
ing cradle. This ensures that the batteries
do not run down.
– Ideally the handset should be positioned 1
to 2 metres away from the baby. The micro-
phone must be directed towards the baby.
– The connection to which the room monitor
is diverted must not be blocked by an acti-
vated answering machine.