Swisscom Aton CL200 Скачать руководство пользователя страница 30

Страница: 30 / 56

Sub-menu 1

Sub-menu 2

Settings

Code

Sprache

Display

Deutsch

#110

Sprachführng

*1,

Deutsch

Français

Italiano

#112

Main menu:

“

Smart-Key Setup

”

Operation

Code

Customising the smart function key.

#278

Main menu:

“

Wecker

”

*14

Operation

Code

Customising the alarm function.

#720

Main menu:

“

Anrufer sperren

”

Operation

Code

Storing/Viewing bar call numbers.

#217

*1 Aton CLT200 series: page 3
*2 If you program these settings using one of the handsets, you do not need to program the

same item using another handset.

*3 This menu is not displayed when scrolling through the display menus. It is only available in

direct command code.

*4 You can set the wallpaper to display with or without date and time by pressing

. The

default setting is with date and time displayed.

*5 You can set the handset display backlight while on charge.

–

“

Ein

”

: Backlight is on (dimmed).

–

“

Aus

”

: Backlight turns off after 10 seconds of charging.

*6 The ringer tone may continue to play for several seconds even if the caller has already hung

up. You may either hear a dial tone or no one on the line when you answer the call.

Inc.

*8 If you do not want the unit to ring before the caller information is received, set to

“

Aus

”

You can only remove the first ring if the unit rings two times or more by default, which
depends on your service provider/telephone company.

*9 This feature allows the unit to automatically adjust the date and time each time caller

information including date and time is received.
To turn this feature on, select

“

Anrufer ID

”

. To turn this feature off, select

“

manuell

”

To use this feature, set the date and time first (page 15).

*10 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any

keys, including confirmation tones and error tones.

*11 If you want to view the caller’s information after lifting up the handset to answer a call, turn

off this feature.

*12 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX

supplier if necessary.

Programming

ATON_CL200_CLT200(en-de)_0731_ve30 30

2014/07/31 20:28:34

Содержание Aton CL200

























































Результаты поиска

Содержание Aton CL200

Отзывы:

Похожие инструкции для Aton CL200

Бренды по названию

Популярные бренды

Swisscom Aton CL200, Руководство по эксплуатации

Результаты поиска

Содержание Aton CL200

Отзывы:

Похожие инструкции для Aton CL200

Бренды по названию

Популярные бренды