1
Aton CL114 / Swisscom EN / A31008-M2402-F151-1-2X19 / Bali.fm / 13.07.2012
Te
mpla
te Bali, V
e
rsion
1, 16.0
2.2012
Aton CL114
The handset at a glance
1 Charge status of the batteries
2 Signal strength
3 Display keys
4 End call key and On/Off key
5 Talk key/Handsfree key
6
Control key
(
p
)
ª
Audio settings
INT
Internal call
â
Directory
|
Muting during a call
7
Key 1
network mailbox
8
Star key
Ringers on/off (press and
hold
);
with an open connection:
switch from pulse dialling to
tone dialling (press
briefly
)
9
Key 0/recall key
Consultation call (flash): press
and
hold
10
Hash key
Keypad lock on/off (press and
hold
); toggles between upper/
lower case and digits; inserts a
dialling pause (press and
hold
)
11 Microphone
Handset display keys:
Pressing a key launches the function
that appears above that key in the dis-
play.
Please note
New messages in the calls list/net-
work mailbox list are indicated in
the display by the message
New
messages
, the left display key
flashes (if set
Display Function when pressed
’
Open calls list (
§Menu§
Open main/submenu
(see menu overview
”
Go back one menu level.
Y
Scroll up/down or adjust vol-
ume with
q
.
X
Move cursor to left/right
with
r
.
Ü
Backspace deletes one
character at a time.
§OK§
Confirm menu function or
save entry.
Ð
U
INT 1
23.04. 10:53
‘
Menu
The base station at a glance
Registration/paging key:
Search for handsets (press
briefly
Register handsets (press and
hold
ECO DECT
During a call, the transmission power is automatically adjusted to the distance
between handset and base station, the smaller the distance, the lower the
transmission power (radiation). In idle status the transmission power of the
handset is switched off. Only the base station ensures contact with the hand-
set using low radio signals.
Your phone offers you the opportunity to further reduce the transmission
power:
1) Reducing transmission power (eco mode)
If the setting
Max. Range
is switched to off (menu tree
page 16), the trans-
mission power in standby mode and during a call is reduced up to 80% at half
range.
2) Deactivating transmission power (eco mode+)
With the setting
No Radiation
(menu tree
page 16), you turn off the trans-
mission power of the base station in standby mode completely. Please note:
◆
All registered handsets must support this feature.
◆
For quick connection of incoming calls the handset repeatedly switches
to reception mode for short periods. This increases energy consumption
and therefore reduces the standby and talk times.
1
2
3
4
5
6
7
8
9
10
11
