42
Base settings
Aton CL113 Duo / Swisscom en / A31008-M2202-F151-1-2X19 / registr_sett.fm / 07.07.2011
V
e
rsion 4, 16.0
9
.2005
Protecting against
unauthorised access
Protect the system settings of the base sta-
tion with a PIN known only to yourself. The
system PIN must be entered when, for exam-
ple, registering/de-registering a handset to/
from the base or when restoring the default
settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting:
0000
) to a 4-digit
PIN that only you know.
§Menu§
¤
Settings
¤
System
¤
System PIN
~
Enter the current system PIN
and press
§OK§
.
~
Enter your new system PIN and
press
§OK§
.
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the PIN to the original code
0000
using the button on the base
.
This will also
reset other settings
; see the section enti-
tled "Resetting the base to the default set-
tings".
Resetting the base to the
default settings
When restoring default settings:
u
Individual settings are reset
u
All lists are deleted
u
Eco Mode
is deactivated and
Eco Mode+
is activated
The date and time are retained.
Resetting the base via the menu
When resetting via the menu
u
Handsets are still registered
u
The system PIN is not reset.
§Menu§
¤
Settings
¤
System
¤
Base Reset
§OK§
Press the display key.
Resetting the base using the
button on the base
When resetting the base using the button on
the base
u
All
handsets
are
de-registered
and
u
The system PIN is reset to the original
code
0000
Carry out the following steps:
¤
Remove the mains cable from the base
¤
Hold down the registration/paging key
on the base (
page 2) and reconnect
the power cable to the base at the same
time. Hold the key down for at least 5 sec-
onds.
Please note
All handsets are de-registered and must
be re-registered. All settings are reset to
the default settings.