Swisscom Aton CL111, Руководство пользователя

Страница: 54 / 64

52
20405092en_ba_a0
Settings
Ecomode plus
Multi Handset Low Radiation Mode
Electromagnetic radiation is shut down between the base station and all declared hand-
sets. Handsets and base station are waiting for a wake-up signal either in form of an
incoming call, when activating a handset or when the system synchronises data.
When Ecomode plus is set to ON , and as long as you are not conducting a conversation,
ECOMODE PLUS is displayed instead of the handset name and the range symbol is
depicted in dotted lines. Ecomode plus is activated after every use as soon as you replace
the handset in the base station.
After inactivity of about one minute, and without placing the handset(s) in the base
station, Ecomode plus is reactivated automatically.
Radiation reduction in communication
65% radiation reduction on the handset is achieved when it is near the base station.
The handset’s power transmission is regulated; the power transmitted from the handset is
automatically reduced to the lower level, depending on the distance to the base station.
This feature is activated when Ecomode plus is set to
ON .
Procedure:
1.
Press the softkey under MENU . Press to scroll to
ECOMODE PLUS
in the
SETTINGS
menu and press OK to confirm.
2.
Switch Ecomode plus on or off.
Note • Default setting on delivery: Ecomode plus activated.
• Other cordless DECT products in range may interfere with Ecomode plus.
• You can activate either Ecomode plus or the repeater mode.
If you active both features, a conflict message will appear.