35
SMS (text messages)
Aton CLT109 / Swisscom EN / A31008-M2007-F151-1-2X19 / sms_BRD_neutral.fm / 04.02.2009
Ve
rs
ion 4,
29
.10.
2007
Setting SMS centres
Entering/changing SMS centres
¤
You should find out about the services
and special functions offered by your
service provider
before you make a
new application
and before you delete
preconfigured phone numbers.
§Menu§
¢
SMS
¢
Settings
¢
Service Centres
q
Select an SMS centre (e.g.
SMS
centre # 1
) and press
§OK§
.
You have the following options:
Active Send Srvc. Cent.
If the SMS messages are to be sent
through this SMS centre, press
§OK§
to
activate the SMS centre (
‰
= on). If a
different SMS centre was active previ-
ously, then this will be deactivated.
For the SMS centres 2 and 3, the set-
ting only applies to the next SMS.
SMS centre #
Enter the number of the SMS centre
and press
§OK§
.
Sending an SMS via another SMS
centre
¤
Activate the SMS centre (2 or 3) as the
active send service centre
¤
Send the SMS.
This setting only applies to the next SMS
to be sent. After that, the setting returns
to
SMS centre # 1
.
SMS on a PABX
u
You can only receive an SMS when the
Calling Line Identification is for-
warded
to the extension of the PABX
(CLIP)
. The CLIP evaluation of the
phone number for the SMS centre takes
place in your
Aton
.
u
If required, you must prefix the number
for the SMS centre with the access code
(depending on your PABX).
If in doubt, test your PABX, e.g. by
sending an SMS to your own number:
once with and once without the access
code.
u
When you send SMS messages, your
sender number may be sent without
your extension number. In this case the
recipient cannot reply to you directly.
Sending and receiving SMS messages
on
ISDN PABXs
is only possible via the MSN
number assigned to your base station.
Activating/deactivating SMS
function
The SMS function is active by default.
If you deactivate the SMS function, you
cannot send or receive any SMS messages
with your phone.
The settings you have made for sending
and receiving SMS messages (e.g. the
numbers of the SMS centres) and the
entries in the incoming and draft message
lists are saved even after you turn off your
phone.
§Menu§
Press the display key.
M 4 O 2 3
Enter the digits.
Q
§OK§
Deactivate SMS function.
Or:
§OK§
Activate SMS function.
Please note:
When supplied, the access number
(062 210 00 0*) for the Swisscom SMS centre
is pre-programmed.
