Swiss Timing CONSOLE SATURN WP, Руководство пользователя

Страница: 20 / 33

Page 16 3403.504.02 Version 2.2
[Setting Horn ]
Selection and duration of the horn at the end of a period, pause and timeout.
[Period: x]
Duration in seconds of the horn (on the board) at the end of
each period (introduce 0 if no horn is wished at the end of
each period).
[10 Sec]
If the box is ticked ( ),the horn will be activated for one
second, 10 seconds before the end of each timeout.
[Pause & Timeout: x]
Duration in seconds of the horn (on the board) at the end of
each pause and each timeout.
[Pause]
If the box is ticked ( ), the horn will be activated at the end
of each pause.
[Timeout]
If the box is ticked ( ),the horn will be activated at the end
of each timeout.
[Scoreboard settings ]
Selection of the number of the lines, the orientation and the type of scoreboard.
[Lines: x]
Number of lines on the scoreboard.
[Vertical]
If the box is ticked ( ), the scoreboard is installed in
vertical orientation.
If the box is not ticked ( ), the scoreboard is installed in
horizontal orientation.
[Calypso SW]
If the box is ticked ( ), the Calypso SW scoreboard is
selected.
If the box is not ticked ( ), other type of scoreboard is
selected.
5.2 [Save] Save the sports settings
The last modifications of parameters in the several sports are saved in the console. A confirmation
message is displayed before the backup.
5.3 [Standard] Change the standard settings for a sport
Downloads the standard settings for the selected sport. This operation does not save those values in the
memory. If you wish to use these parameters for the next competitions, you must save the values as
described in the above chapter.
5.4 [All Def & Save] Reset the standard settings for all sports
Downloads all the parameters of each sport and saves them in the memory. This function downloads the
standard settings of Swiss Timing (See chapter Standard Settings).
This function must be done after a firmware upload.