PEDESTAL SINK
INSTALLATION INSTRUCTIONS
2. Connect Pipes
·
Install waste and overflow into sink basin.
·
Screw plumbing pipes into basin.
NOTE:
Plumbing not included.
1
¹⁄2
” Discharge pipe location varies between
models and may need to be re-plumbed
before installation.
5. Seal Sink - 2 People Required
· Person 1- Slightly tilts sink back, so basin just barely lifts off ground.
Person 2- Apply construction adhesive underneath the sink.
· Gently lower basin back to standing position.
· Caulk the sink to the floor with silicone or sealant of your choice.
NOTE:
Do not use sink until 24 hours after sealing.
4. Dry Fit Sink
· Dry fit pedestal sink before final installation. Once you are ready for
final installation, move on to step 5 below.
— 6 —
3. Connecting Plumbing
· We recommend installing the faucet (not included)
of your choice while back of sink is accessible.
· Align pipes in basin to plumbing in wall.
· Tighten into place, with clockwise motion.
NOTE:
Water shutoff valve should be slightly above
the 1
¹⁄2
” drain line coming out of the wall.
SM-PS307: 23”
SM-PS308: 27”
SM-PS310: 25”
SM-PS311: 25”
SM-PS312: 23”
SM-PS313: 25”
