8
9
Swiss Rotors energy recovery wheels are sent on either wooden
pallets or transportation supports, sealed against weather
conditions, attached and strapped to prevent tilting. Wheel matrix
is additionally protected with cardboard and stretch foil to protect
from accidental scratches or punctures. Each heat exchangers
are equipped with additional leaning label.
SF heat series wheels are placed and tightly strapped to wooden
pallets, per MOQ. Transportation supports can withstand the
weight of the exchanger and prevent tilting to facilitate safe
transportation.
Wheels are covered with additional layer of carboard material to
Individual shipments may be packed in wooden casings with
wheel matrix protected by additional flakeboard layer.
3. TRANSPORTATION
3.1 Packing
To avoid dents or scratches on the wheel surface please make sure to properly secure the package for the
further transportation.
3.2 At delivery
Each heat exchanger is equipped with special Leaning Label (Fig.
4) identifying whether the goods were transported in an appropriate
manner. Balls inside the contoured channels will help visualize the
method of transportation and whether the package was subjected to
undesirable tilting. Pay attention to the warranty sealing sticker of the
label – each leaning label is additionally taped with warranty seal before
shipment. Warranty is void if the warranty seal is broken or missing.
At the time of delivery, you should do the following:
• Check the condition of the package carefully in the presence of
a shipping company representative before delivered parcel will
be accepted. Look for any signs of transportation damage. Our
rotary heat exchangers are precisely and tightly secured for the
shipment. There should not be any signs of tearing on the surface
of the package, punctures, exposed elements or traces of opening.
•
Pay attention to the way in which the goods were delivered. Check the leaning label and its warranty seal
sticker. Rotary exchangers can only be shipped in a vertical position. Any other way of arranging the package is
unacceptable. Pay attention to whether the shipment is delivered on a pallet or it has been dismantled without
permission.
• Swiss Rotors prepare shipments using professional labels and transport descriptions. If you see that the shipping
company did not followed the instructions given on the package - refuse to accept the parcel.
•
Check if the received parcel matches with your order. Inspect the product label plate for confirmation.
•
In case of any damage please contact our support immediately - phone numbers are listed at the Contact chapter
of this guidebook or at our official website: www.swissrotors.com.
Figure 3.2
Leaning label with warranty seal atta
-
ched to the casing of rotary heat exchanger.
Figure 3.1
Swiss Rotors – packing of heat exchanger
