Swisher Versa Commercial Pro VSP50, Руководство пользователя

Страница: 12 / 22

OPERATION
12
Locking Lever
Adjusting the Plow Angle
The angel of the plow can be adjusted straight ahead or
in 15° degree increments to the left or to the right.
Fig. 12.2
Optional Tether
If using the option Tether, it should be tied to the steel
loop provided on the Locking lever. The Tether should
then be routed along the Right-Hand side of the tractor
(opposite of the engine exhaust and can be tied to the
lower handle of the console. (See FIG. 12.3 & 12.4).
To Change the Plow Angle without the tether:
1. Raise the plow above the ground so it will pivot freely.
2. Set the Parking Brake.
3. Use one hand to pull back the Locking Lever and use
your other hand to pivot the plow blade to the desired
position.
4. Release the Locking Lever and make sure it engages
the associated slot to lock the plow in place.
5. Release the Parking Brake.
To Change the Plow Angle from operators
position with the tether:
1. Lower the plow so it is touching the ground.
2. Pull the tether to release the Locking Lever and place
you hands on the tractor controls (still holding tension
on the tether). Steer the Tractor left or right. Release
the tether at the desired angle and the locking lever
will latch back in to the desired angled slot.
The angle of the plow is locked in place by a spring
loaded Locking Lever. (See FIG. 12.2)
An optional tether is supplied with the plow to allow the
operator to release the locking lever from the operator’s
position if desired. (FIG. 12.3)
Optional Tether
Fig. 12.4
Fig. 12.1
Fig. 12.3