Swisher Predator WB924 Скачать руководство пользователя страница 5

The operation of any mower can produce foreign objects to be thrown into the 
eyes, resulting in severe eye damage.  Always wear certified safety glasses or 
wide-vision safety goggles over spectacles before staring any cutting machine and 
while operating such a machine.

The operation of any cutter produces sound waves that are damaging to the 
human ear.  Ear protection is recommended.

CAUTION!
Tragic accidents can occur if the operator is not alert to the presence of 
children.  Children are often attracted to the machine and the mowing 
activity.  Never assume that children will remain where you last saw them.

OPERATING YOUR NEW CUTTER

INTENDED USE
This is not a lawn mower. The Predator is designed for cutting overgrown brush, weeds, 
and other types of organic growth. This unit is capable of clearing small saplings of 1-
1/2” in diameter or less.
PROPULSION
The Predator is self-propelled, and is controlled by a “GROUND CONTROL” bail. To 
engage the drive, put the transaxle in a gear and activate the lower bail. Releasing the bail 
will disengage the self-propel.
Under most conditions cutting should be done in a low gear (1

st

or 2

nd

). Upper gears 

should be used for conditions where weeds and brush are thinned out or not as tall. In 
confined areas the machine can be pushed forwards or backwards by releasing the 
“GROUND CONTROL” bail, placing the transaxle in neutral, and pushing the machine.
TRAVEL SPEED
Can be varied by choosing a higher or lower gear using the gearshift lever at the rear of 
the machine or by changing the engine speed with the engine throttle. Do not adjust speed 
with the blade engaged. To shift the cutter into reverse, release “GROUND CONTROL”
bail, disengage blade, and rotate the shift lever to the left. When the lever stops lift up the 
reverse lockout latch and continue to move the shift lever to the left until it stops again. 
Blade will not engage while cutter is in the “reverse” gear.
ENGAGING BLADE
An “OPERATOR PRESENCE” bail and a “BLADE ENGAGE” lever control work 
together to engage the Predator’s blade. Both devices must be activated before the blade 
will work. Releasing the “OPERATOR PRESENCE” bail will disengage both the blade 
and the “BLADE ENGAGE” lever.

5

Содержание Predator WB924

















Отзывы: