1
2
3
5
6
4
Front
Item #
Description
Part #
1
Mount Plate Right
10608TK
2
Mount Plate Left
10609TK
3
Cross Plate
10453TK
4
Strap Bar
10454TK
5
Clevis Pin
10305
6
Hair Pin #39
NB127
7
Bolt 5/16-18 X
NB138
8
U Bolt 5/15-18
7873Z
9
Carriage Bolt
10216
10
Nylock Nut
NB181
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..
1.
Assemble Right Mount Plate and Left Mount plate to the Cross Plate using Carriage bolts ( Item 9),
and Nylock Nuts ( Item 10) and snug the fasteners .
2.
Place the mount plate up against the frame with the front toward the front of the ATV
3.
Drop the U Bolts over the foot rest supports on the right side and attach with Nylock Nuts .
4.
Place the long bolts ( Item 7 ) into Strap Bar (Item 4 ) and place the close spaced bolts over the rear
foot rest support on the left hand side. Attach with Nylock Nuts.
5.
Align the plate to the center of the ATV and tighten all hardware securely.
7
8
9
10
