1
Mount Plate
10518TK
2
Front Strap Plate
10324TK
3
Carriage Bolt
NB517
4
Nylock Nut 5/16-18
NB181
5
Hair Pin #39
NB127
6
Clevis Pin
10305
7
Bolt M8-1.25 X 25
NB723
8
Nut M8-1.25
NB718
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..
1.
Place the mount plate up against the bottom of the frame. The Blade Mounting Tabs should be
pointing down and located toward the front of the ATV.
2.
Align the rear holes with the holes in the frame. Install the M8 Bolts and Nuts, just snug.
3.
Install Carriage bolts into plate (Item2) and place on top of the frame aligning with the holes in the
front of the plate. Snug up with Nuts (Item 4)
4.
Center plate under the bike and tighten the bolts securely
1
2
3
4
5
6
8
7
