7
Remove contents from the cart. As noted previously. Remove the plastic ties securing the motor base
assembly to the crate but leave the motor base in position on the crate to aid in assembling to the cart.
Remove the cart from the crate base and turn it to align with motor base as shown in the illustration.
Roll the cart forward, sliding the cart frame into the motor base. Using the hardware provided, bolt the
cart and motor base assembly together. Take the tongue and align it to the guide on the front of the unit
and push it through until the pin holes align, allowing the pin to be installed and secured. Lift up on the
tongue and roll the cart assembly away from the crate base.
UNCRATING INSTRUCTIONS
Align these two holes and use 3/8-16X1” Hex Head
bolts and lock nuts (provided) to fasten together.
Cart
Motor Base
Tongue
Deck Boot
Fig. 1
Fig. 2
Fig. 3
Eyebolt
Fabric Bag
H 1
1/4-20 X 1 1/2 Bolt
H 2
SAE Flat Washer 1/4-Zinc Yellow
H 3
Nylock Nut 1/4-20
H 1
H 2
H 3
Bag Support
Structure
Safety Hitch Pin