STEP 8: ATTACHING RAKE ARMS
Insert the rake wheel arm(#2) into the lift
arm from in STEP 7. Secure rake wheel arm
to the lift arm using lock pin attached to end
of the lift cable.
See figure 8 for rake arm
position.
Repeat procedure for the rake arm on
opposite side.
STEP 9: ATTACH RAKING WHEELS
Attach three rake tine wheels(#6) to rake
wheel axle arm(#2)
as shown in figure 9
.
Secure with M16 nylock nut(H). Make
certain that tines on all three wheels are
pointed in the same direction. Look at tips
of rake tines for direction.
CAUTION:
Do not over tighten locknut as
it will cause bearing damage in the rake tine
wheel hub. Rake tine wheel should spin
freely. Assemble opposite side.
Make certain that the three rake tine
wheels on opposite side are positioned as
shown in figure 10. All rake tine tips
should rotate towards center in same
direction.
Figure 8
Figure 9
Figure 10
