7
Directions For Use
To attach the Trail Mule trailer to your tow vehicle simply align the hitch
tube with any standard 2” receiver hitch on your ATV and slide the hitch
through until the holes for the hitch pin are aligned and install your existing
hitch pin.
When your Trail Mule trailer is not in use during transport or for storage the
trailer can be raised off of the ground and rotated forward. Use the NB606
hitch pin supplied with the trailer to secure the trailer in the raised position
as pictured below.
Storage or transport position
To pivot the Trail Mule trailer to its storage
or transport position, simply raise the rear
of the trailer until one of the three holes align
with the slot in the pivoting hitch. Install the
supplied pin (NB606) and hairpin securely.
Use caution when raising the trailer to the tilt
position.
