•
Cut 1 piece of black 5mm heat shrink 200mm and feed over both cables now as later on you will
not be able to do this.
•
Cut 2 piece of 40mm long 2.5mm black heat shrink to cover the resistor once installed.
•
Cut 4 pieces of 25mm long 2.5mm black heat shrink to cover the wires joined to the LED.
•
Strip each wire back approximately 6mm / 1/4” and tin with solder to both wires at the ends of
the 2 cables ready to install the LED’s.
manual V-05
(5-10-22)
of
6
17
