41
Assembly Instructions
Fig. 32
Fig. 32a
Fig. 32b
Fig. 32c
RingTrap Assembly
Ring-Trap Assembly:
1.
Attach 33'' chains to Quick Links as shown in
(Fig. 32)
.
2.
Attach Quick Links to Ring-Trap as shown in
(Fig. 32a)
.
3.
Hand tighten quick Links as shown in
(Fig. 32b)
.
4.
Tighten
ALL
Quick Links with a wrench as shown in
(Fig. 32c)
.
5.
Hang the chains from the nylon bushing swing hangers. Crimp the hook opening closed with a pliers to secure the chains to the
swing hangers
(Fig. 32d)
. Make sure all connections are tightly crimped and secure before using Ring-Trap.
Fig. 32d
Fig. 33
Anchor-It Installation.
Instructions for Anchoring Swing•N•Slide Activity Centers
1.
Determine the final location of your activity center.
2.
Place the Anchor-It stakes adjacent to the base and near the corners of your
activity center (at the bottom of the legs on swing sets) and twist the auger-
style stakes into the ground until only the loop is exposed.
3.
Place the metal strap through the loop of the Anchor-It stake and secure it to
the unit with a lag screw and washer as illustrated to the right. Note: Attach
the strap to the unit with as little play as possible using whatever holes in the
strap that work best.
1-1/2"
lag bolt
metal
strap
Anchor-It
Flat Washer
Anchor-It
x2
