Swing-N-Slide NE 5010 Скачать руководство пользователя страница 3

Страница: 3 / 24

This product is intended for single family home/residential use only and not intended for use in any public setting.

Placement in any public setting constitutes a misuse of this product.

IMPORTANT

ADDITIONAL REQUIRED SAFETY INSTALLATION INSTRUCTIONS

According to ASTM requirements, all kits must be anchored to the ground and, if the unit has a climbing rope, the rope end must be anchored to the ground. If soil conditions permit stakes to

be pulled out easily, cementing into ground is necessary.

• To anchor the unit to the ground,

Follow the instructions included in this plan for applying Anchor-It devices to your unit, or use 2” x 4” x 18” (45mm x 95mm x 457mm) pressure-treated

stakes. Pound stakes into ground at least 12” (305mm) at all inside corners of the posts (including A-frame legs and climbing unit posts). Attach with four (4) 16D (3-1/2”) galvanized nails

per stake into each tower and/or A-frame upright.

• If the unit has a climbing rope,

anchor the rope end.

• Once the unit is completely assembled and before children are allowed to play on it, proper shock-absorbing surfacing material must be installed.

This may be accomplished by

using loose-fill materials at a sufficient depth. The Consumer Product Safety Commission “Handbook for Public Playground Safety” lists the following materials and required depths that are

sufficient for home/residential application. For fall height protection up to 9 ft. (2.742m) [recommended for Swing•N•Slide kits]:

LOOSE FILL MATERIAL

REQUIRED (UNCOMPRESSED) DEPTH

in. (mm)

Wood Mulch

9” (229mm)

Double Shredded Bark Mulch

9” (229mm)

Uniform Wood Chips

12” (305mm)

Fine Sand

12” (305mm)

Fine Gravel

12” (305mm)

These depths were derived from the CPSC Handbook. Swing•N•Slide has not

done independent tests to determine these required depths.

When properly installed, shock absorbing material will completely cover the horizontal baseboards on climbing units. This protective surfacing must extend a

minimum

of 6 ft. (1.828m) in all

directions from the perimeter of the equipment or from the outermost edges of any component. For example, a slide extending beyond the platform must have protective surfacing at least 6

ft. (1.828mm) out from both sides as well as the end. For swings, the protective surface must extend

at least 14 ft. (6m)

out from

both

the back and front of the swing when the swing is in its

rest position.

Swing-N-Slide® MANUFACTURERS LIMITED WARRANTY

Swing-N-Slide® takes great pride in the quality and durability of our products. Our Manufacturer’s Limited Warranty provides confidence and demonstrates our

commitment to providing quality residential playground products.

MANUFACTURER’S LIFETIME LIMITED WARRANTY

Swing-N-Slide® warrants its thermoformed slides and climbing mountains to be free from defects in workmanship and materials, under normal use and conditions, for the

lifetime of the product.

MANUFACTURER’S 5 YEAR LIMITED WARRANTY

Swing-N-Slide®

warrants its Custom Ready-to-Build Play Set kits and accessories to be free from defects in workmanship and materials, under normal use and

conditions, for a period of 5 years.

MANUFACTURER’S 5 YEAR LIMITED WARRANTY

Swing-N-Slide®

warrants its No-Cut and Wood Complete Ready-to-Assemble Play Set kits against wood rot and termite damage, and to be free from defects in

workmanship and materials, under normal use and conditions, for a period of 5 years for structural wood components.

Cosmetic defects

that do not affect the structural integrity of the product, or natural defects of wood such as warping, splitting, checking, twisting, shrinkage, swelling or

any other physical properties of wood that do not present a safety hazard, are not covered by this warranty.

MANUFACTURER’S ONE YEAR WARRANTY

Swing-N-Slide®

warrants its canopy roofs and/or tarps, and Timber GLOVE lumber wrap to be free from defects in workmanship and materials, under normal use and

conditions, for a period of one year.

Swing-N-Slide®

will repair, or at its discretion, replace any part within the stated warranty period which is defective in workmanship or materials. This decision is subject

to verification of the defect upon delivery of the defective part to Swing-N-Slide® at 1212 Barberry Drive, Janesville, Wisconsin, 53545. Any part(s) returned to Swing-N-

Slide® must have prior approved Return Authorization Number and proof of purchase, including the date of purchase. This warranty is valid only if the product is used

for the purpose for which it was designed and installed at a residential, single family dwelling. This warranty is void if the product is put to commercial or institutional use.

This

warranty does not cover (a) products which have been damaged by acts of Nature, negligence, misuse, or accident, or which have been modified or repaired by

unauthorized persons; (b) the cost of labor; or the cost of shipping the product, any part, or any replacement product or part.

Swing-N-Slide®

DISCLAIMS ALL OTHER REPRESENTATIONS AND WARRANTIES OF ANY KIND, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE,

INCLUDING THE

IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. Swing-N-Slide® WILL NOT BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES. This warranty is non-transferable and does not extend to the owners of the product subsequent to the original purchaser. Some states

do not allow limitations on implied warranties or exclusion of incidental or consequential damages, so these restrictions may not be applicable to you. This warranty gives

you

specific legal rights. You may also have other rights, which vary from state to state.

This warranty also does not apply to:

• Structures not erected, maintained or inspected in conformance with

Swing-N-Slide®

installation plans

• Structures that have had parts added or substituted not in conformance with

Swing-N-Slide®

installation plans

•

Parts that have been modified, altered or misused

•