SWIMSHAPE SSSBM-019A Скачать руководство пользователя страница 1

Need Assistance?

As a manufacturer, we are committed

to providing complete customer

satisfaction.

If you have questions, or if a part

is damaged or missing, follow the

directions below based on your 

location:

For U.S. and Canadian Customers:

DO NOT CONTACT THE RETAILER

.

Instead call us toll free at:

1-877-793-2198

Monday - Friday, 8:00 am to 5:00 pm

(Mountain Standard Time)

For customers outside the U.S.

and Canada:

Contact the retailer for assistance.

USER’S MANUAL

Sleeve-Mounted Base

For use with the QuikFire™ Pool Basketball Hoop,

QuikSpike™ Pool Volleyball Set™, and Pool-Up Bar.

Part No. SSSBM-019A

WWW.SWIMSHAPEFITNESS.COM

        WARNING:

To ensure your safety, do not 

attempt to install this system 

without reading and following 

all instructions. Please read all 

precautions in this user’s 

manual and the product user’s 

manuals before using this 

equipment. Failure to comply 

may result in serious injury or 

death. Keep this manual for 

future reference.

!

© 2019 | SwimShape, LLC

Document # 1001-19A-r2

INSTALLATION INSTRUCTIONS START ON PAGE 4.

i

Содержание SSSBM-019A











Отзывы: