Setting Vibrate Alarm
From SETUP
Press
Start
, press
mode
until
you see VIB SET
If the vibrate alarm is set to 4 laps for example (the default setting) it will vibrate
the watch for a couple of seconds when you are approaching the end of the 4th
lap.This can be really useful in keeping track of your laps without looking at the
watch.
To set alarm to vibrate on a Time interval
From VIB SET, press
Start
and VIB LAP will
show, press Up twice until you see VIB
TIME.
Press Start, the hours will flash. Press
Up
and
Down
to change value.
Press
Mode
and the minutes will flash. Press
Up
and
Down
to change value. Press
Mode
again to change seconds. Hold
Start
to save.
To set alarm to vibrate on a different lap
count
From VIB SET press
Start.
VIB LAP 4 will
appear, press
Start
and the lap number will
flash. Press
Up
and
Down
to change value.
Hold
Start
for 2 seconds to save
PoolMateLive 7
The PoolMateLive has a small motor inside that will vibrate when it detects
you have swam a certain number of laps, distance or time. You will feel a
short buzz on your wrist when this occurs.
IN SUMMARY:
select setting to
change, press
up
and
down
to change value then hold
Start
for 2 secs to save and exit
From VIB SET press
Start
, press
Up
to choose between setting lap
interval, distance, Time intervals or turn vibration off. Press
Start
to
