6-32 philips screw
Nylon shoulder washer
Nylon shoulder washer
Spring
Aluminum
Tension limiter
4-40 socket screw
Stainless steel frame
Nylon spacer
Socket
Plastic retention
frame
Motherboard
CPU
Figure 6
4.
Connecting the water-block(s) to the cooling
circuit. FAQS:
Inlet and outlet are interchangeable.
In Multi-Processor environments, optimal water-
block performance will be achieved by connecting
them in series (outlet of one connected to the inlet
of the other).
5.
Type of Coolant:
a. For best performance, use 95% distilled water,
and 5% Swiftech brand “HydrX” corrosion
inhibitor (available here:
http://www.swiftnets.com/store/category.asp?Ca
tID=2
, under the “accessories” section).
b. In ALL cases, you MUST use Distilled water
AND a corrosion inhibitor with the MCW5002
water-block. Regular automotive anti-freeze is
acceptable. Automotive manufacturers
recommend that not less than 25% is used.
c. NEVER use tap water, even for a short-term
test.
d. Not following paragraphs b and c above
constitutes misuse (*) of the product, and will
void your warranty.
6.
Final inspection
Once the installation is completed,
it is always a good idea to test the circuit for leaks, prior to powering up the computer
.
Troubleshooting help is available on our web site at
www.swiftnets.com
, or by calling customer support at 562-595-8009.
Note concerning removal of the tubing
: Push in collet
squarely against face of fitting, using swiftech’s tube removal tool, or
a wrench of approximately the same opening diameter as the tube
(1/2” +). With the collet firmly held against the face of the fitting, the
tube can be safely pulled out. Do not attempt to pull the tube out
without pushing squarely against the collet. This may result in
damaging the fitting.
IMPORTANT DISCLOSURES
While all efforts have been made to provide the most comprehensive tutorial possible, Swiftech assumes no liability expressed or implied for any
damage(s) occurring to your components as a result of using Swiftech cooling products, either due to mistake or omission on our part in the above
instructions, or due to failure or defect in the Swiftech cooling products.
WARRANTY
Our products are guaranteed for 12 months from the date of delivery to the final user against defects in materials or workmanship. During this period,
they will be repaired or have parts replaced provided that: (I) the product is returned to the agent from which it was purchased; (II) the product has
been purchased by the end user and not used for hire purposes; (III) the product has not been
misused
(*)
, handled carelessly, or other than in
accordance with any instructions provided with respect to its use. This guarantee does not confer rights other than those expressly set out above and
does not cover any claims for consequential loss or damage. This guarantee is offered as an extra benefit and does not affect your statutory rights as a
consumer.
Page 2 of 2
