Swiftech Inc., 1703 E. 28
th
St., Signal Hill, CA 90755 T. (562) 595-8009 F. (562) 595-8769
Page 2 of 2
Installing the tubing:
It is usually easier to install the tubes before the
radiator is fastened to the case. Cut sufficient
length of tubing to connect to the rest of the
circuit and tighten the clamps to the radiator
inlet and outlet. There should be only 3 to 4
notches left “open” once the clamp is fully
tightened.
Electrical connection:
Once the radiator is installed inside the case, the final step is to connect the molex connector to your
computer power supply.
Radiator specifications:
Fans specifications:
Height: 4.1” (104.8mm); Width: 3.25” (82.5mm); Depth:
3.2” (81.6mm)
2-pass 80 mm radiator specifically developed for PC
CPU and VGA liquid cooling
Double-row high internal volume design
Rated for 236.6 KCal per hour (938.89 BTU per hour) or
275W
80 mm (3 inch) Copper core consisting of flat tubes for
maximum heat conductivity
High-density copper fin configuration for enhanced heat
dissipation
3/8" OD inlet and outlet for use with 3/8" ID tubing.
Each fan:
Part #
Voltage
(V)
Current
(mA)
Revolution
(RPM)
Volume
(CFM)
Max
Static
pressure
(InH20)
Sound
Noise
(dBA)
G8015-
L
12
120
3200
29
0.11
32
