Copyright Swiftech 2014
– All rights reserved – Last revision date: 7-18-14 - Rouchon Industries, Inc., dba Swiftech® –151 West Victoria Street, Long Beach, CA 90805 – Tel.
310-763-0336 - Toll free (US) 888-857-9438
– Fax 310-763-7095 - E Mail: [email protected] – URL: http://www.swiftech.com - Information subject to change without notice
6. Pump specifications
Technical Specifications
Motor type
Electronically
commutated, brushless
DC motor
Max. pressure
22 PSI (1.5 BAR)
Nominal voltage
12 V DC
Temperature range
Up to 140 °F (60 °C)
Operating voltage
range
7 to 13.4 V DC
Electrical power
SATA connector
Max. power (@12 V)
25.8 W
PWM + RPM Signals
4-pin connector
Max. current (@12 V)
2.15 A
RoHS
Compliant
Max. head (@12 V)
15.8 ftH2O (4.8 mH2O)
Port thread standard
G1/4 (1/4” BSPP)
Max. discharge (@12 V)
3.8 gpm (14.3 Lpm)
Weight
7.6 oz
ALWAYS TEST YOUR INSTALLATION FOR LEAKS PRIOR TO POWERING-UP YOUR COMPUTER!
DISCLAIMER:
While all efforts have been made to provide the most comprehensive tutorial possible, Swiftech® assumes no liability expressed or
implied for any damage(s) occurring to your components as a result of using Swiftech® cooling products, either due to mistake or omission on our part
in the above instructions, or due to failure or defect in the Swiftech® cooling products. In addition,
Swiftech™ assumes no liability, expressed or
implied, for the use of this product, and more specifically for any, and all damages caused by the use of this product to any other device in a personal
computer, whether due to product failure, leak, and electrical short, and or electro-magnetic emissions
.
WARRANTY:
This product is guaranteed for a period of 36 months from date of purchase for defects in material, and workmanship. Guarantee
consists of replacing defective parts with new or reconditioned parts. Guarantee is considered void in case of improper use (*)(**), handling or
negligence on the part of user. Original invoice showing date and place of purchase is required for exercise of the warranty.
(*) WARNING: DO NOT ATTEMPT TO RUN THE PUMP DRY. THIS WILL CAUSE IMMEDIATE AND PERMANENT DAMAGE TO THE PUMP.
(**) EXCESSIVE WEAR DUE TO INADEQUATE FLUIDS.
During this period, they will be repaired or have parts replaced provided that: (I) the product is returned to the agent from which it was purchased; (II)
the product has been purchased by the end user and not used for hire purposes; (III) the product has not been misused, handled carelessly, or other
than in accordance with any instructions provided with respect to its use. This guarantee does not confer rights other than those expressly set out
above and does not cover any claims for consequential loss or damage. This guarantee is offered as an extra benefit and does not affect your statutory
rights as a consumer.
