Swift SW50, Руководство пользователя, Страница: 7 / 8

6
Lamp setting is too low Increase intensity on the
control knob
Voltage is too low Use the supplied power
adapter
Objective lens collides with
the slide when switching
from a lower to a higher
power objective Slide is upside down or too
thick Use a lab-quality slide or
flip the slide over so the
cover slip is facing up
Stage is set too close to
the objectives Lower the stage with the
coarse focus knob
Safety rack stop needs
adjustment Adjust the safety rack stop
to stop the stage farther
from the objectives
Image won't come into
focus when using a high-
powered objective Slide is upside down Flip the slide over so the
cover slip is facing up
Lamp does not turn on No power source Check that the adapter is
fully connected or that
batteries are installed
Bulb has burned out Replace the bulb
Lamp flickers while on Bulb is not inserted into the
socket correctly Check to make sure the
bulb is fully screwed into
the socket
Power adapter is not fully
plugged in Check to make sure that
the adapter is fully
connected to wall socket
and to the microscope
VII. Warranty information and customer support
Our microscopes are manufactured to meet ISO 9001 standards. Swift warranties are
as follows: