Swift SW380 Series, Руководство пользователя

Страница: 10 / 12

9
Light is too dim Iris aperture is closed too
far Open the iris aperture
wider
Bulb setting is too low Increase intensity on the
control wheel
Condenser lens is dirty Wipe the condenser lens
off with a soft cloth
Voltage is too low Use the supplied power
adapter
Image won't come into
focus when using a higher-
powered objective Slide is upside down Flip the slide over so the
cover slip is facing up
Slide is not moving when
using the X-Y translational
control knob Slide has come unclipped
from the holder Reposition slide in the
holder and secure with clip
Lamp does not turn on No power source Check that the adapter is
fully connected or that
batteries are installed
Bulb has burned out Replace the bulb
Lamp flickers while on Bulb is not inserted into the
socket correctly Check to make sure the
bulb is fully screwed into
the socket
Power adapter is not fully
plugged in Check to make sure that
the adapter is fully
connected to wall socket
and to the microscope