Swift SW350 Series, Руководство пользователя

Страница: 5 / 12

4
II. Parts of the microscope
III. Assembly and set up
Carefully remove the microscope from the box and set it on a sturdy, flat surface.
Remove the plastic covers from the eyepiece holders on the microscope's head, then
place eyepieces into the holders. You may choose at this time to insert the eyepiece
adapter into the trinocular camera port on the top of the microscope and place either a
third eyepiece into it or mount an eyepiece camera (not included). Locate the power
adapter and attach it to the microscope, then plug it in. Turn the microscope on by
pressing the power button on the back of the base.
IV. Using the microscope
Turn the microscope on and use the illumination intensity control wheel to set the lamp
on the lowest brightness setting.
Clip a slide into the slide holder on the stage. Use the X-Y translational control knobs on
the right side of the stage to move the stage front to back or the slide holder left to right to
center the specimen over the bulb.
SW350T