Swift SW200DL, Руководство пользователя

Страница: 6 / 9

5
Issue Possible cause Solution
Visual field is uneven, or
image is dark at the edges Nosepiece is not locked in
place to center the
objective lens Turn nosepiece until you
hear a click to center the
objective lens
Slide is not centered over
the bulb, leaving part of the
specimen unilluminated Center the slide over the
bulb
Dirty objective or eyepiece
lens Clean with compressed air
or soft brush
Disc diaphragm hole
selection is too small Rotate the disc diaphragm
to a larger hole
Visual field is blurry or dirty Dirty objective or eyepiece
lens
Clean with compressed air
or soft brush
The slide is dirty Clean the slide with glass
cleaner or lens cloth
Eyepiece or objective lens
not fully screwed into place Tighten eyepiece or
objective lenses
Poor image quality No cover slip on the
specimen Place glass cover slip over
the specimen
Slide is too thick or too thin Use a lab-quality slide
Slide is placed upside
down on the stage Flip the slide over so that
the cover slip is facing up
Dirty objective lens Wipe the lens off with soft
cloth and glass cleaner
Disc diaphragm hole
selection is too small Rotate the disc diaphragm
to a larger hole
Image moves while
adjusting focus Slide is shifting on the
stage Reposition slide more
securely in the clips
Light is too dim Disc diaphragm hole
selection is too small Rotate the disc diaphragm
to a larger hole