Swift STP512B, Руководство пользователя

Страница: 12 / 14

4.2 Description of Pre-printed Black Mark
If users use pre-printed black mark to locate the receipt, please be sure to
abide by the following black mark pre-print regulation when print the black
mark paper, otherwise, it will cause that the printer cannot identify the black
mark.
The black mark pre-print regulations are as below:
Printing Position:
As the picture above, the black mark should be printed on
the right edge of the printed side of paper.
Width range:
width≥7mm
Height range: 4mm≤height≤6mm
Reflectivity of infrared ray: <10% (infrared ray reflectivity of other parts of the
black mark paper is>65%)
HPS : it is the distance between edges of black mark and loading position.
4.5mm≤Hps≤6.5mm
Appendix
The appendix is usage method to set printer parameters:
Setting instruction:
Choose setting item through
【
MODE
】
button. Press
【
MODE
】
button once, the setting item will go to the next. item and print the
current number value of this item. Choose the setting value of setting item
through
【
FEED
】
button. Press
【
FEED
】
button once, the setting value will go
to the next.
Primary settings:
MODE MODE MODE
MODE MODE
MODE MODE MOD
Baud
Sensor Blackmark
mode
Printing
direction
Printer-off
mode
Language Font Density