background image

 

OPERATING YOUR SWIFT M27LED TRI-POWER STEREO 

MICROSCOPE 

 
1.  Place the specimen on the stage plate. 
 
2.  Rotate the objective turret to the lowest magnification and move 
 

the specimen in the field of view. Grasp the eyepiece tubes and 

 

move them either closer together or farther apart, until you see 

 

one field of view. 

 
3.  Rotate the focus knobs until the specimen image is in focus. (If 
 

you cannot get the specimen in focus, you may have to use the 

 

height adjustment knob to raise or lower the optics to alter the 

 

working distance to the specimen). 

 
4.  Close your right eye and adjust the diopter ring on the left eyepiece 
 

tube to bring the image in focus with your left eye. The optical 

 

system is now adjusted to your particular vision. 

 
5.  Turn the turret to a higher power for increased magnification. 
 
 

SERVICE 

 

Always unplug the microscope from the power outlet while 

performing service and maintenance on the microscope.

 

 

Your Swift M27LED Stereo Microscope is designed to function 
satisfactorily with only ordinary maintenance. The instrument should be 
periodically serviced by a qualified, authorized service technician who 
will clean, re-lubricate and perform routine adjustments. Unauthorized 
personnel should never disassemble lens assemblies or other precision 
components. For information regarding service, contact your local Swift 
authorized repair dealer, or call Swift customer service at (800) 523-
4544. 
 
Replacement top LED illuminator (incident illuminator)- 
Part # MA14773, 3.4V/0.3W 
Replacement bottom LED illuminator (trans-illuminator)- 
Part # MA14774, 3.4V/0.06W 
 

Содержание M27LED Series









Отзывы: