swepac FR95, Руководство пользователя в оригинале

Страница: 4 / 16

4
F95
D
ok
: 101536-
GB 2045
Sound pressure level at
the operator’s ears, LpA
90dB (A)
Permitted sound power
level, L
WA
105 dB (A)
Guaranteed sound power
level, L
WA
105 dB (A)
STANDARDS
Noise
Measurement according to the standard EN 500-4
Rev.1: 1998, Annex C: Measurement uncertainty ±
0,5dB (A) i 95% of measurements.
In accordance with the conditions in Directive 2000/14/
EC, Annex VI, the following values are reported:
As the sound pressure level at the operator’s ears
exceeds 80 dB (A), ear protectors must be used during
operation!
Hand/arm vibration
Vibration acceleration has been measured according
to the ISO 5349 standard when driving on gravel
substrates. The measured values have been
converted to maximum daily exposure during regular
use. Further information is available in the work
environment regulations AFS 2005:15 on vibration,
valid from 1 July 2005.
Measurement uncertainty ± 0,3 m/s2 in 95% of
measurements.
SAFETY INSTRUCTIONS
• Before using the machine, the operator must be
informed of the manufacturer’s safety instructions
and instructions for use.
• The machine may only be used outdoors.
• The machine may not be used if protection and
safety devices are not present or not working.
• The operator may not leave the machine unat-
tended when the engine is on. When the vibrator is
connected, the operator must be able to control the
movement of the machine using the operating lever
and the start/stop controls. The machine may only
be operated by a trained operator.
• During maintenance work or other interventions in
the machine, the engine must always be off.
• Switch the engine off before adding fuel. Avoid fuel
spillage and immediately wipe off any spilled fuel.
Add fuel only in well ventilated areas.
• Avoid touching hot engine parts, for example the
silencer.
• Before lifting the machine, check that the lifting de-
vice and its mounting are not damaged and that the
rubber dampers on the base plate are undamaged
and tightened.
• During transportation and storage, the fuel tank
should be empty and the fuel cock switched off.
• When the machine is parked, ensure that it cannot
tip over. The machine must not incline more than
20º. (FR 95 18º)
• The operator must use ear protectors when work-
ing with the machine.
• The operator must ensure that no unauthorised
persons are in the immediate vicinity of the ma-
chine.
• Always wear personal protective equipment as
heavy, non-slip shoes, ear protectors and approved
eye protection.
• The machine may not be used in environments
with potential fire or explosion danger.
• Never use the machine if you are tired or have con-
sumed alcohol or are using medication that could
affect your vision, your discretion or your coordina -
tion ability.
• Never use a machine that, in any way, has been
changed from its original design.
FR 95
Hand/arm-vibrations
m/s
2
< 2,5
Maximum daily
exposure
5,2
tim
Exhaust Emissions
The machines meet the requirements for exhaust
emissions in accordance with Euro V.
Additional information
Environmentally approved for use in large cities.