6 ©2021 SwellPro
To change the waterproof lens, simply unscrew the original lens, then screw the ND
filter lens back to the camera. Turn the filter CW to tighten up. Turn the filter CCW to
loosen up.
Ensure the orange rubber ring is attached to the camera when installing ND filters.
Ensure to aline the lens properly when installing ND filters as the lines on the screw
are very thin and can be damaged if not screw on properly.
After Use Casing
After using the gimbal camera, you can choose not to take off the gimbal camera and
put it directly into the case with the drone. Follow the following steps to make sure the
gimbal camera is properly secure after casing.
1. Remove the double-side-glued pad from the
gimbal box and paste the pad into the
drone’s
case as showing to the left.
2. After cleaning and drying the gimbal camera
and the aircraft, secure the gimbal camera with
the fixing case, then put the aircraft and other
parts into the case. The case is secure and ready
to be carried or transported.
