Swegon WISE Parasol EX 1290, Инструкция по эксплуатации, Страница: 2 / 16

WISE Parasol EX
2
Swegon reserves the right to alter specifications. 23/11/2017
Application area
The product is a suspended comfort module with inte-
grated radio transmitter designed for demand-controlled
climate indoors within Swegon’s ventilation system WISE.
The product is used to ventilate, cool and heat premises
exactly as needed.
The product may not be used for anything other than its
intended use.
General
Read through the entire instructions for use
before you install/use the product and save the
instructions for future reference. It is not permis-
sible to make changes or modify this product
other than those specified in this document.
Contents
1 x WISE Parasol EX (base module)
1 x WISE Parasol EX (design module)
1 x Instructions for use
Protective equipment
Always use appropriate personal protective
equipment for the work in question, in the
form of gloves, respirators, protective glasses
and helmets during handling, installation,
cleaning and service/maintenance.
Electrical safety
Permitted voltage, see Electrical data.
It is not permissible to insert foreign objects
into the product’s contactor connections or
ventilation openings; risk for short circuiting.
24 V isolation transformer to be connected should comply
with the provisions of IEC 61558-1.
Cable sizing must be carried out for cabling between the
product and the power supply source.
Disconnect the power supply when working on products
that are not required to run.
Always follow the local/national rules for who shall be
permitted to carry out this type of electrical installation.
Handling
Always use appropriate transport and lifting devices when
the product is to be handled to reduce ergonomic loads.
The product must be handled with care.
Installation
• Moist, cold and aggressive environments must be
avoided.
• Assemble the product according to this instruction and
applicable industry regulations.
• Install the product for easy access during service/main-
tenance.
• Avoid installing the product near a heat source.
• Check to make sure that the product does not have
any visible defects.
• Check that the product is properly secured after it has
been installed.
• Secure cables with cable ties.
• Check that all cables are properly secured in place after
installation.