LOCUS
2
Swegon reserves the right to alter specifications. 22/12/2022
Application area
LOCUS is a setpoint selector switch with built-in temperature
sensor that is used to increase or decrease the setpoint
temperature. It also displays air flows, pressure, VOC CO2
and alarms, and can be used as a configuration tool during
commissioning.
The product may not be used for anything other
than its intended use.
General
Read through the entire instructions for use before
you install/use the product and save the instructions
for future reference. It’s not permissible to make
changes or modifications to this product other than those
specified in this document.
Protective equipment
Always use appropriate personal protective equipment
for the work in question, in the form of gloves,
respirators and protective glasses during handling,
installation, cleaning and service/maintenance.
Electrical safety
Permitted voltage, see “Electrical data”. It is not permissible
to insert foreign objects into the product’s connectors or the
electronics’ ventilation openings; risk for short circuiting.
Cable classification:
Always follow the local/national rules for who are permitted
to carry out this type of electrical installation.
Handling
• The product must be handled with care.
Installation
• Moist, cold and aggressive environments must be
avoided.
• Avoid installing the product near a heat source.
• Assemble the product according to applicable industry
regulations.
• Install the product for easy access during service/
maintenance.
• If the product is mounted above a fixed ceiling, the
inspection hatch must be located so that the product is
accessible for inspection.
• Check to make sure that the product doesn’t have any
visible defects.
• Check that the product is properly secured after it has
been installed.
• Check that all cables are properly secured in place after
installation.
