EN
43
Swegon reserves the right to alter specifications.
2020-12-22
Blues | Salsa | Samba | Tango | Jazz
5. Use
Swegon CASA cooker hoods feature a touch
panel (except Tango), from where you can
control the functions on the cooker hood
and ventilation unit. The signal lamps on the
panel are dimmed automatically when the
hood is not in use. The Tango hood offers the
same control functions and indications, but it
is operated by buttons located on the side of
the hood.
1. Selection of fan speed.
On a ventilation
system connected to a Swegon CASA
ventilation unit the operating modes Away,
Home or Boost can be selected. The period
for operation at boosted speed is preset to
60 minutes, after that period the ventila-
tion unit returns to the Home speed.
2. Fan speed indication.
The signal lamp indicates the speed of the
fans operating in the ventilation unit. From
left to right, the lamps indicate the Away,
Home and Boost fan speeds.
3. Cooker hood damper control.
The continuously open period for the
cooker hood’s damper is selectable in three
settings: 30, 60 or 120 minutes. Each press
of the button increases the damper-open
time one step and the fourth press of the
button closes the damper. Long press the
control button to keep the damper open
for 10 hours (to cool during the summer,
the function should not be used during the
heating season).
4. Open damper time indication.
The number of signal lamps indicate the
continuous open period selected for the
damper. The damper is closed if no lamp
is lit.
1 lamp = 30 minutes
2 lamps = 60 minutes
3 lamps = 120 minutes
lamp 1 + lamp 3 = 10 h
5. Control of the cooker hood lighting.
The hood’s lighting is switched on and off
with a button. The factory default of the
lighting output is 75 %.
5
1
2
3
4
The lighting output can be regulated with
a long press on the button, the brightness
then changes. Pressing the button again
changes the brightness in the other direc-
tion. When the brightness is at the right
level, wait a moment without pressing the
button until the light flashes to indicate
the setting has been saved.
Functions on the SMART ventilation unit
The functions in a ventilation unit that are con-
trolled with cooker hood are indicated as follows:
• Away or Boost mode’s lamp is lit
slightly
: The Smart function controls the
ventilation to higher or lower values. If you
wish to continue normal operations you
can override the Smart functions with the
fan speed selector button.
• All lamps flashing
: there is a serious mal-
function in the unit, contact an authorised
service company.
• Fan speed indication lamps flashing
:
the unit indicates a service requirement.
When a service has been carried out this is
acknowledged by pressing the fan speed
selector button for 5 seconds.
• Away mode lamp flashing
: the unit is
shut-off. The unit can be started by press-
ing the fan speed selector button.
6. Service and maintenance
Make sure that the cooker hood and grease
filter are cleaned regularly. Otherwise the
capacity for capturing cooking odours reduces
significantly and the collected grease can
represent a fire risk.
Surfaces
Clean the surfaces of the cooker hood with a
damp cloth and mild washing-up liquid. Do
not use polish or solvents when cleaning.
Grease filter
Under normal conditions the grease filter
should be cleaned about twice per month.
Clean the filter through washing by hand in
warm water. If a grease filter is cleaned in a
dishwasher this may cause the colour on the
surface of the filter to change.
