SweepEx SWB-320, Руководство пользователя

Страница: 9 / 28

Lit. No. 72356, Rev. 00 9 March 1, 2019
OPERATING IN WINTER
Check regularly that the air ¿ lter is dry. If the air
¿ lter has become wet, let it dry overnight. There is a
possibility of the engine not starting due to a clogged
air
¿ lter.
Spray the throttle cable with silicone spray at both
ends and the throttle linkage before operating to
prevent the cable or throttle mechanism from freezing
up.
Silicone spray attracts dust and binds it to the rotary
broom. It is only a suitable lubricant in wintry and
snowy conditions.
Do not spray silicone spray on hot engine. It could
cause a
¿ re. Follow the instructions on the spray can.
Before putting the rotary broom away, sweep it clear of
snow.
Avoid freezing the rotary broom. Store the rotary
broom in a frost-free room.
Remove foam pre- ¿ lter.
Use SAE 5W-30 motor oil.
GENERAL SAFETY
Do not operate the rotary broom in an unsafe
manner. Make yourself familiar with the surroundings
before starting work in a new location. The working
surroundings include any obstacles in the work area or
on roads, the ground load-bearing capacity, and any
necessary workplace safety precautions in live traf
¿ c.
Take precautions to ensure that the rotary broom is
only operated in a safe and functional condition. Only
operate the rotary broom if all protective and safety
devices are present and working.
Check the rotary broom for externally visible damage
and faults before operation. If malfunctions occur stop
the rotary broom and secure it immediately. Repair
malfunctions immediately. Only start the rotary broom
from the operator's position. Ensure that no one can
be endangered by starting the rotary broom before
switching it on or operating it.
Check that braking, steering, and brushing are fully
functional before operation.
Before operating the rotary broom, always check that
accessories are
¿ tted correctly.
Always observe applicable traf ¿ c regulations before
operating on public roads, paths, or parks, and ensure
that the rotary broom is in a condition suitable for use
in traf
¿ c.
Always ensure that suitable lighting is available before
working in poor light or darkness. Always keep a
suf
¿ cient distance between the rotary broom and
drop-offs, holes, or slopes.
Do not permit any method of working which will affect
the stability of the rotary broom.
Never traverse across slopes; always travel up and
down, not across.
Adjust the speed to suit the conditions on inclines.
Change gear before the incline, not on it. Always
secure the rotary broom against rolling away and
unauthorized operation before leaving it unattended.
GENERAL SAFETY/OPERATING IN WINTER