Instruction Sheet
MX1E and MX1E-2
Mini Electric Consoles
L2135
Rev. D
04/08
1.0 IMPORTANT RECEIVING INSTRUCTIONS
Visually inspect all components for shipping damage.
Shipping damage is
not
covered by warranty. If shipping
damage is found, notify carrier at once. The carrier is
responsible for all repair and replacement costs resulting
from damage in shipment.
SAFETY FIRST
2.0 SAFETY ISSUES
Read all instructions, warnings, and cautions
carefully. Follow all safety precautions to
avoid personal injury or property damage
during system operation. Sweeney cannot be responsible
for damage or injury resulting from unsafe product use,
lack of maintenance or incorrect product and/or system
operation. Contact Sweeney when in doubt as to the
safety precautions and operations. Failure to comply with
the following cautions and warnings could cause
equipment damage and personal injury.
A
CAUTION
is used to indicate correct operating or
maintenance procedures and practices to prevent
damage to, or destruction of equipment or other property.
A
WARNING
indicates a potential danger that requires
correct procedures or practices to avoid personal injury.
A
DANGER
is only used when your action or lack of
action may cause serious injury or even death.
WARNING:
Wear proper personal protective gear
when operating hydraulic equipment.
DANGER:
To avoid personal injury keep hands
and feet away from cylinder and workpiece
during operation.
Never
set the relief valve to a higher pressure than
the maximum rated pressure of the pump. Higher
settings may result in equipment damage and/or
personal injury.
WARNING:
The system operating pressure must not
exceed the pressure rating of the lowest rated
component in the system. Install pressure gauges in
the system to monitor operating pressure. It is your window
to what is happening in the system.
CAUTION: Avoid damaging hydraulic hose.
Avoid
sharp bends and kinks when routing hydraulic
hoses. Using a bent or kinked hose will cause severe
back-pressure. Sharp bends and kinks will internally
damage the hose leading to premature hose failure.
1325
9414
6772
950
1000
1025
975
7124
7300
6950
1375
1400
1350
9766
9943
9593
4321
600
2407
325
5372
750
6071
850
925
900
875
6248
6600
6421
825
800
775
5897
5545
5721
PSI
Ft.Lb
675
725
700
4848
5193
5021
350
375
2579
2993
1125
8000
1225
8707
1250
1300
1275
9236
9062
8886
1175
1200
1150
8179
8357
8531
Ft.Lb
PSI
1050
1100
1075
7476
7828
7650
4497
4669
625
650
RSL2
1014
125
1710
225
275
300
250
2055
2229
1883
175
150
200
1364
1186
1538
Ft.Lb
PSI
2921
400
3621
500
4145
3972
3800
550
575
525
3100
3448
3276
425
475
450
Ft.Lb
PSI
8909
6225
1850
2700
9384
9847
9541
6384
6543
6700
1900
1950
2000
2850
2900
3000
6857
PSI
7331
7175
7016
7806
7650
8121
8279
7962
7489
8752
4962
1450
2200
5438
5279
5752
5911
5594
5121
6069
1650
1700
1750
1800
1550
1600
1500
2400
2450
2500
2650
2350
2300
2250
2438
2597
4489
4806
4648
Ft.Lb
1300
1400
1350
650
700
PSI
Ft.Lb
2150
2100
2050
1200
1250
4331
4175
1175
1333
1491
1648
1806
1965
2122
2279
450
500
600
550
250
400
300
350
1150
1100
1000
1050
3543
3857
3700
4016
850
800
900
950
3070
2911
3228
3384
1016
Ft.Lb
200
Ft.Lb
750
PSI
RSL4
PSI
2753
BEFORE USING
ALL INSTRUCTIONS
READ AND UNDERSTAND
TO AVOID INJURY
WARNING
STOP
MX1E and MX1E-2 consoles are designed for use with double-acting torque wrenches and remote pendant operation.
Consoles are equipped with glycerine-filled pressure gauges and adjustable pressure relief valves. The heat exchanger
prevents heat buildup, and the time-out circuit stops the motor after 15 seconds of idle running.