Basic operation
Preparation
•
Put the TV on a stable surface.
•
Do not fix the TV with others fixations than those provided or suggested by the manufacturer.
•
If you have a wall mount, check that it is steady.
•
Do not place any material on the TV.
•
Do not block or cover the ventilation openings on the TV.
•
The TV must be plugged with a tension source of 110-240 volts and 50-60 Hz.
•
Power cord and cables must be properly routed and protected to prevent from stepping on
them.
•
Keep the power cord away from any heat source. Possible fire hazard.
Heating sources and humidity
•
Keep the TV dry and away from humidity.
•
Keep the TV away from heat sources.
Cleaning and maintenance
•
Unplug the TV before cleaning it. Do not use solvents or liquids to clean the TV.
•
Only clean the TV with a soft and dry cloth.
•
In case of troubleshooting, do not use spare parts other than those suggested by the
manufacturer. Using inadequate spare parts can lead to electric shocks, short-circuits fire or
others incidents. Please contact a technical authorized by SWEDX brand.
Departure in holidays
•
Unplug the LCD-TV during lightning storms or when unused for long periods of time.
•
Use AC 100-240V 50-60 Hz power outlet for the TV power supply.
•
lf the screen of TV is not on, please press the power button on the remote control or on the
TV.
•
lf you want to shut off the TV temporary, please press the power button on the remote control
or on the TV.
•
lf you want to shut off the TV completely, please switch off the power switch ON/OFF.
•
In TV/AV state, the TV will enter idle state if there is no signal input within 3 minutes.
•
ln PC state, the TV will enter idle state if there is no signal input within 2 minutes.
•
The setting and tuning of picture and sound will be saved when the TV is shut off, which will
be working in the pre-shut off state when the TV is turn on again.
•
lf PC signal source is used, please first set the resolution of the PC display card as the
following modes: (1920x1080 60 Hz for Full HD models and 1366x768 for HD models).
•
lf there is progressive output of the signal used by the user, signal source with
output is recommended.
progressive
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER(OR BACK). REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
Design and specifications are subject to change without notice.
5