Swarm Tile Скачать руководство пользователя

Страница: 2 / 63

Legal Notices

This User Manual provides user information and is provided “as is.” Swarm Technologies and its affiliated

companies, directors, officers, employees, agents, trustees or consultants (“Swarm”) assume no

responsibility for any typographical, technical, content or other inaccuracies in this User Manual. Swarm

reserves the right to revise this User Manual or withdraw it at any time without prior notice. You can find

the current version of this Swarm Tile User Manual at

www.swarm.space

SWARM MAKES NO GUARANTEES, CONDITIONS, WARRANTIES, OR REPRESENTATIONS,

EITHER

EXPRESS

IMPLIED,

INCLUDING

WITHOUT

LIMITATION,

ANY

IMPLIED

REPRESENTATIONS, GUARANTEES, CONDITIONS OR WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, SATISFACTORY QUALITY,

NON-INTERFERENCE, ACCURACY OF INFORMATIONAL CONTENT, OR ARISING FROM A

COURSE OF DEALING, LAW, USAGE, OR TRADE PRACTICE, USE, OR RELATED TO THE

PERFORMANCE OR NONPERFORMANCE OF ANY PRODUCTS, ACCESSORIES, FACILITIES,

SERVICES OR USER INFORMATION, EXCEPT AS EXPRESSLY STATED IN THE LIMITED

WARRANTY. ANY OTHER STANDARDS OF PERFORMANCE, GUARANTEES, CONDITIONS AND

WARRANTIES ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED TO THE FULLEST

EXTENT PERMITTED BY LAW. THIS DISCLAIMER AND EXCLUSION SHALL APPLY EVEN IF THE

EXPRESS LIMITED WARRANTY PROVIDED IN THE LEGAL INFORMATION BOOKLET FAILS OF ITS

ESSENTIAL PURPOSE. FURTHER, THE LIMITED WARRANTY COVERS THE SWARM TILE

(INCLUDING HARDWARE, SOFTWARE AND/OR FIRMWARE) AND ACCESSORIES ONLY, AND NO

WARRANTY IS MADE AS TO USER INFORMATION AND/ OR COVERAGE, AVAILABILITY OR

GRADE OF SERVICE PROVIDED BY SWARM SEPARATELY FOR SWARM SATELLITE SERVICES.

IN NO EVENT SHALL SWARM BE LIABLE, WHETHER IN CONTRACT OR TORT OR ANY OTHER

LEGAL THEORY, INCLUDING WITHOUT LIMITATION STRICT LIABILITY, GROSS NEGLIGENCE OR

NEGLIGENCE, OR IMPLIED WARRANTY, FOR ANY DAMAGES IN EXCESS OF THE PURCHASE

PRICE OF THE Swarm Tile (INCLUDING HARDWARE, SOFTWARE AND/OR FIRMWARE) AND/OR

ACCESSORIES AND/OR THE COST OF SWARM SATELLITE SERVICES PROVIDED, NOR SHALL

SWARM BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR

PUNITIVE DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS,

LOSS OF PRIVACY, LOSS OF USE, LOSS OF TIME OR INCONVENIENCE, LOSS OF INFORMATION

OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS CAUSED BY THE SWARM

TILE (INCLUDING HARDWARE, SOFTWARE AND/ OR FIRMWARE) AND/OR ACCESSORIES

AND/OR THE SWARM SATELLITE SERVICES, OR ARISING OUT OF OR IN CONNECTION WITH

THE ABILITY OR INABILITY TO USE THE SWARM TILE (INCLUDING HARDWARE, SOFTWARE

AND/OR FIRMWARE) AND/OR ACCESSORIES AND/OR THE SWARM SATELLITE SERVICES , TO

THE FULLEST EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW AND REGARDLESS OF

WHETHER SWARM WAS ADVISED OF THE POSSIBILITIES OF SUCH DAMAGES.

June 2020

Swarm Tile Manual - Rev 1.00

2/63

Содержание Tile
































































Результаты поиска

Содержание Tile

Отзывы:

Похожие инструкции для Tile

Бренды по названию

Популярные бренды

Swarm Tile, Руководство по эксплуатации продукта

Результаты поиска

Содержание Tile

Отзывы:

Похожие инструкции для Tile

Бренды по названию

Популярные бренды