1.
Using your PC or cell phone, access your WiFi network preferences:
a.
Locate and connect to the
swarm-xxxx
network in your device’s network
preferences.
i.
A notification of “Connected without internet” or similar is expected.
b.
Enter default password
12345678
.
c.
Note that you can change the SSID and password - see Feather Commands
section
2.
Using a Telnet-enabled tool, connect to the default address 192.168.4.1 using
port
23 to communicate with the Eval Kit.
Example Tools below:
3. You can now simply queue a message on the Eval Kit by using the $TD
(Transmit
Data) command. Determine what you would like to send as your first
message (within
- Command:
$TD
- Message string (in quotes):
"Hello World!"
- Message checksum:
*31
The full command to the Swarm modem will then be:
$TD "Hello World!"*31
If the message is accepted, a
$TD OK
response will be received, and the
message will be queued for transmission, and stored in the Swarm modem
memory. See section 7 of the
Swarm M138 Modem Product Manual
details and other commands.
For example:
JuiceSSH for Android
Access Point (AP) Mode
ZOC
(PC/Mac)
Message Transmission
SOMETHING BROKEN OR MISSING?
CONTACT SWARM CUSTOMER SUPPORT:
TECHSUPPORT
@
SWARM.SPACE
iTerminal for iOS
SWARM EVALUATION KIT QUICKSTART GUIDE
PAGE
12
© 2022 SWARM TECHNOLOGIES
