sWaP smart Watch and Phone, Руководство пользователя

Страница: 57 / 63

Important safety information
Exposure to radio frequency (RF) signals
Avoid contact with water. If your sWaP
watch becomes wet, switch it off and
remove the battery. Carefully and
completely dry out your sWaP watch and
the battery before attempting to switch
it back on.
Do not press hard on your sWaP watch
as this may cause damage to the touch
screen.
Do not expose your sWaP watch to
direct sunlight, extremely high or low
temperature, dusty/sandy conditions or
very humid environments for extended
periods of time as this may cause
damage to the screen and/or internal
circuitry.
Do not throw, beat or vibrate your sWaP
watch in a manner that might damage
the external casing, the sensitive touch
screen or internal circuitry. Your sWaP watch contains a radio
transceiver. When it is on, it sends and
receives radio frequency (RF) signals.
When you communicate using your
sWaP watch, the system handling your
call controls the power level at which
it transmits.
Your sWaP watch is designed to comply
with local regulatory requirements in
your country concerning exposure of
human beings to RF energy.
Operational precautions
To ensure that your sWaP watch contin-
ues to serve you reliably, look after it as
you would any other valuable item and
also follow these guidelines:
Apart from the battery cover, do not
open your sWaP watch or tamper with
the internal circuitry as this could cause
damage and will void your warranty.
Your sWaP watch is NOT waterproof.